Kumud Innovator

 Soil Compaction is mandatory during foundation work. Soil compaction using water is the best way as it settles the soil in a proper way.  We are using this in our Jigni residential construction project.        CLICK FOR MORE POSTS    

 Performing a Cube Test for the sample of concrete used in the construction project is mandatory as it gives detail about the strength achieved after 7 days and 28 days.  It gives the overall idea about the concrete strength used.  Below Cubes are used for our Jigni Project at Bangalore.     CLICK FOR MORE POSTS    

 The use of Ready Mix Concrete (RMC) is an Ideal choice in construction projects. It is better to use RMC as the mixing quality of Concrete is good to compare to the manual process. Go for Branded RMC for better results. Below are some of the conditions where using RMC will be a good decision -  Volume of Concrete is big -  Availability of raw material like Cement, Sand, Aggregate, Water, etc is difficult. -  Not much place near the site to dump construction-related Raw Material -  Site is in a narrow place where vehicles cant go -  Surface is not suitable for smooth movements of manpower -  Unavailability of manpower     CLICK FOR MORE POSTS    

   Use of  A  spirit level or  Bubble  level is a must during plumbing work to check the level of the pipe. If the Pipe level is not correct, it will create a big problem while fixing the Mixer or other fittings.     CLICK FOR MORE POSTS    

  Bar bending for Column Footing is the key for the building foundation. Steel proposition, spacing between two rods, etc are critical which need to be checked before starting the concreting. Executed it at our Jigni (Bangalore) Project.       CLICK FOR MORE POSTS    

   PCC is one of the very important steps during building construction. It is the layer between the soil and footing RCC. If PCC is not done properly, there are high chances for steel getting rusted due to its contact with soil.     CLICK FOR MORE POSTS